#!/usr/bin/perl -w
#------------------------------------------------------------------------
#
# $Sendmail: Parse_conf.pm,v 8.14.4 2014-02-11 13:02:08 cowboy Exp $
#
# Parse and update /etc/mail/sendmail.conf
#
# Copyright (c) 2001-2010 Richard Nelson.  All Rights Reserved.
#
# Notes (to all):
#
# Notes (to self):
#
#------------------------------------------------------------------------
#
# Package/Module declaration
package		Parse_conf;
require		Exporter;
@ISA		= qw(Exporter);
#@EXPORT	= qw(read_conf write_conf);
@EXPORT_OK	= qw(read_conf write_conf get_value);
$VERSION = '2.0000';
#
# Initialization of the perl environment
use strict;			# be kosher
#use warnings;		# Not needed here
use Cwd;			# provide cwd()
use Env;			# A few environmental references
use integer;		# Peformance
use Sys::Hostname;	# make sure we have a valid hostname
use Getopt::Long;	# parameter handling
use FileHandle;		# I/O

# Local libraries - for Debian Sendmail Perl helper functions
# BEGIN { $main::my_path = substr($0,$[,rindex($0,'/')) };
use lib ('.', substr($0,$[,rindex($0,'/')), "/usr/share/sendmail");
require Parse_mc;

# Version of this program
#($main::MYNAME		= $main::0) =~ s|.*/||;
#$main::Author		= "Richard Nelson";
#$main::AuthorMail	= "cowboy\@debian.org";
#$main::Version		= '$Revision: 1.00 $ ';
$Parse_conf::program_name = 'Parse_conf.pm';
$Parse_conf::program_version = '8.14.4';
$Parse_conf::program_date = '2014-02-11 13:02:08 cowboy';
$Parse_conf::debug = 0;

my $interp_pgm = "$^X";
my $interp_vrm = $];
$interp_vrm = ("$^V" | '000') if (defined $^V);
my $current_time = scalar localtime;
my $user = getlogin || (getpwuid($<))[0] || "Unknown!!";
my $hostname = hostname();
my $directory = getcwd();

$Parse_conf::Conffile = "/etc/mail/sendmail.conf";
my $debug;

#
#------------------------------------------------------------------------------
# Global variables
#------------------------------------------------------------------------------
my %parm_def = (
	 'DAEMON_NETMODE'	=> 'Static'
	,'DAEMON_NETIF'		=> 'eth0'
	,'DAEMON_MODE'		=> 'Daemon'
	,'DAEMON_RUNASUSER' => 'No'
	,'DAEMON_PARMS'		=> ''
	,'DAEMON_HOSTSTATS' => 'No'
	,'DAEMON_MAILSTATS' => 'No'
	,'QUEUE_MODE'		=> '${DAEMON_MODE}'
	,'QUEUE_INTERVAL'	=> '10m'
	,'QUEUE_PARMS'		=> ''
	,'MSP_MODE'			=> 'Cron'
	,'MSP_INTERVAL'		=> '20m'
	,'MSP_PARMS'		=> ''
	,'MSP_MAILSTATS'	=> '${DAEMON_MAILSTATS}'
	,'MISC_PARMS'		=> ''
	,'CRON_MAILTO'		=> 'root'
	,'CRON_PARMS'		=> ''
	,'HANDS_OFF'        => 'No'
	,'LOG_CMDS'			=> 'No'
	,'AGE_DATA'			=> ''
	);

my %parameter = %parm_def;

my %parm_kw = (
	 'DAEMON_NETMODE'	=> ['static', 'dynamic']
	,'DAEMON_MODE'		=> ['daemon', 'inetd','none']
	,'QUEUE_MODE'		=> ['daemon', 'cron', 'none']
	,'MSP_MODE'			=> ['daemon', 'cron', 'none']
	);

my %parm_bool = (
	 'HANDS_OFF'        => 1
	,'DAEMON_RUNASUSER' => 1
	,'DAEMON_HOSTSTATS' => 1
	,'DAEMON_MAILSTATS' => 1
	,'MSP_MAILSTATS'	=> 1
	,'LOG_CMDS'			=> 1
	);

my %parm_dependant = (
	);

my %parm_deprecated = (
	  'DAEMON_STATS' => 'DAEMON_MAILSTATS'
	 ,'MSP_STATS'	 => 'MSP_MAILSTATS'
	 );

my %parm_hidden = (
	 'DAEMON_RUNASUSER' => 1
	,'prefix'		  => 1
	,'exec_prefix'	  => 1
	,'bindir'		  => 1
	,'sbindir'		  => 1
	,'libexecdir'	  => 1
	,'datadir'		  => 1
	,'sysconfdir'	  => 1
	,'sharedstatedir' => 1
	,'localstatedir'  => 1
	,'libdir'		  => 1
	,'MTA_DAEMON'	  => 1
	,'MTA_COMMAND'	  => 1
	,'MTA_L'		  => 1
	,'MTA_L_QUEUE'	  => 1
	,'MTA_ROOT'		  => 1
	,'MTA_PIDFILE'	  => 1
	,'MSP_DAEMON'	  => 1
	,'MSP_COMMAND'	  => 1
	,'MSP_L'		  => 1
	,'MSP_L_QUEUE'	  => 1
	,'MSP_ROOT'		  => 1
	,'MSP_PIDFILE'	  => 1
	);

#
#------------------------------------------------------------------------------
# Finally, some code (almost)
#------------------------------------------------------------------------------
1; # return (true);


#
#------------------------------------------------------------------------------
# Read /etc/mail/sendmail.conf
#------------------------------------------------------------------------------
sub read_conf {
	my ($input_file) = @_;
	$input_file ||= $Parse_conf::Conffile;

	$debug = $main::debug || $Parse_conf::debug;

	# Update defaults according to current environment
	&update_defaults;

	# Read /etc/mail/sendmail.conf (if extant)
	&read_config($input_file);

	# Update old values to new format
	&update_values;

	# Make sure things are kosher
	my $ok = &validate_config;
	if (! $ok) {
		die "Terminating due to configuration error.";
		};
	};

#
#------------------------------------------------------------------------------
# [Re]write /etc/mail/sendmail.conf
#------------------------------------------------------------------------------
sub write_conf {
	my ($output_file) = @_;

	$debug = $main::debug || $Parse_conf::debug;

	&write_config($output_file);
	};

#
#------------------------------------------------------------------------
# Update default settings according to current environment
#------------------------------------------------------------------------
sub update_defaults {
	my ($class, $flags, $files, $options);
	my ($ok, $stats);
	my $file;

	# Read the mc/m4 files
	&Parse_mc::read_dbs('', '');

	# Obtain entry for HOST_STATUS_DIRECTORY
	($class, $flags, $files, $options) =
		&Parse_mc::entry_dbs('confHOST_STATUS_DIRECTORY');
	$file = @{$files}[0];
	if ( $file ne '-' and -d $file ) {
		$parameter{'DAEMON_HOSTSTATS'} = 'Yes';
		}
	else {
		$parameter{'DAEMON_HOSTSTATS'} = 'No';
		};

	# Obtain entry for STATUS_FILE
	($class, $flags, $files, $options) =
		&Parse_mc::entry_dbs('STATUS_FILE');
	$file = @{$files}[0];
	if ( $file ne '-' and -e $file ) {
		$parameter{'DAEMON_MAILSTATS'} = 'Yes';
		}
	else {
		$parameter{'DAEMON_MAILSTATS'} = 'No';
		};

	# Obtain entry for MSP_STATUS_FILE
	($class, $flags, $files, $options) =
		&Parse_mc::entry_dbs('MSP_STATUS_FILE');
	$file = @{$files}[0];
	if ( $file ne '-' and -e $file ) {
		$parameter{'MSP_MAILSTATS'} = 'Yes';
		}
	else {
		$parameter{'MSP_MAILSTATS'} = 'No';
		};

	};

#
#------------------------------------------------------------------------
# Update old settings according to current format
#------------------------------------------------------------------------
sub update_values {
	my ($ok, $var);

	# Add m(inutes) to {queue,msp}_interval if needed
	$parameter{'QUEUE_INTERVAL'} =~ s/^(p?\d+)$/$1m/;
	$parameter{'MSP_INTERVAL'} =~ s/^(p?\d+)$/$1m/;

	# Also update the queue aging data
	($ok, $var) = &get_value('AGE_DATA');
	my $tmpval = eval $var;
	if ($@) {
		warn $@;
		}
	else {
		$var = $tmpval;
		};
	if (not defined $var) {
		$tmpval = '""';
		}
	elsif (not ref $var) {
		$tmpval = "$var";
		}
	elsif (@{$var} == 0) {
		$tmpval = '""';
		}
	else {
		$tmpval = '[';
		foreach my $entry (@{$var}) {
			foreach my $ndx ($[ .. $#{$entry}) {
				@{$entry}[$ndx] =~ s/'/\\'/g;
				};
			@{$entry}[0] =~ s/^(\d+)$/$1m/;
			$tmpval .= "['" . join("', '", @{$entry}) . "'],";
			};
		$tmpval .= ']';
		$parameter{'AGE_DATA'} = $tmpval;
		};

	# Set any dependant fields here...
	};

#
#------------------------------------------------------------------------
# Obtain parameter name
#------------------------------------------------------------------------
sub get_name {
	my ($name, $quiet)	=  @_;

	# Handle deprecated/renamed variables
	if ( exists($parm_deprecated{$name}) ) {
		print STDERR "$name is deprecated."
			if ($debug and ! $quiet);
		if ( $parm_deprecated{$name} ) {
			print STDERR "	Please use $parm_deprecated{$name} instead.\n"
				if ($debug and ! $quiet);
			$name = $parm_deprecated{$name};
			}
		else {
			print STDERR "	It will be ignored.\n"
				if ($debug and ! $quiet);
			};
		};

	return $name;
	};

#
#------------------------------------------------------------------------
# Obtain value directly, or indirectly
#------------------------------------------------------------------------
sub get_value {
	my ($name)	=  @_;
	my $ok      =  1;
	my $value   = '';
	if ( ! exists($parameter{$name}) ) {
		print STDERR "Variable $name not defined...\n";
		return ($ok, $value);
		};

	$name	=  get_name($name, '');
	$value	=  $parameter{$name};

	my $tval	=  $value;
	$tval		=~ s/^\s*//;
	my $default =  0;

	# Dereference loop...  keep original value if we get any errors...
	Dereference:;
	if ($tval =~ /^\$/) {
		my @ref_stack = ($name);
		my %ref_hash  = ($name => 1);
		while ($tval =~ /^\$/ and $ok) {
			my $start = 1;
			my $del   = 1;
			my $char  = substr($tval, 1, 1);
			if ( $char eq '{' or $char eq '(' ) {
				$start += 1; $del += 2;
				};
			my $ref = get_name(substr($tval, $start,
				length($tval)-$del), '');
			push @ref_stack, $ref;
			if (exists($ref_hash{$ref})) {
				print STDERR "Go directly to jail; do not pass go, ",
					"do not collect \$200\n";
				print STDERR "	Reference loop: ",
					join('->', @ref_stack, '...'),"\n";
				$ok = 0;
				}
			else {
				$ref_hash{$ref} = 1;
				if (lc $ref eq 'default') {
					$tval = $parm_def{$name};
					print STDERR
						"Setting $name to default value: ",
						"$parm_def{$name}.\n"
						if ($debug);
					}
				elsif (exists($parameter{$ref})) {
					$tval = $parameter{$ref};
					print STDERR
						"Setting $name to value of $ref: $tval.\n"
						if ($debug);
					}
				else {
					print STDERR
						"Can not deference $ref, it doesn't exist.\n";
					$ok = 0;
					};
				};
			};
		};

	if ( $ok ) {
		# Check keyword parms for valid values
		if (exists $parm_kw{$name}) {
			my @ltval = split(/\s/,$tval);
			my $ltval = lc(@ltval[$[]);
			my $found = "";
			foreach my $value (@{$parm_kw{$name}}) {
				if ($value eq $ltval) {
					$found = 1; $tval = ucfirst($ltval); };
				};
			if ( ! $found ) {
				$default += 1;
				if ( $default > 1 ) {
					print STDERR
						"Can not resolve $name, value=$value.\n";
					$ok = 0;
					}
				else {
					print STDERR "Illegal value($tval) for $name.\n",
						"  Valid values are: ",
						join(', ', @{$parm_kw{$name}}),
						"\n",
						"  Set to default: $parm_def{$name}.\n";
					$tval = $parm_def{$name};
					goto Dereference;
					};
				};
			}

		# Check boolean parms for valid values
		elsif (exists $parm_bool{$name}) {
			my @ltval = split(/\s/,$tval);
			my $ltval = lc(@ltval[$[]);
			$ltval =~ s/^[ty1].*/1/;
			$ltval =~ s/^[fn0].*/0/;
			if ($ltval eq '0' or $ltval eq '1') {
				$tval = ucfirst($ltval); }
			else {
				$default += 1;
				if ( $default > 1 ) {
					print STDERR
						"Can not resolve $name, value=$value.\n";
					$ok = 0;
					}
				else {
					print STDERR "Illegal value($tval) for $name.\n",
						"  Valid values are: T[rue],Y[es],1,",
						"  F[alse],N[o],0\n",
						"  Set to default: $parm_def{$name}.\n";
					$tval = $parm_def{$name};
					goto Dereference;
					};
				};
			};
		};

	$value = $tval if $ok;

	print STDERR "get_value : $name => $value\n"
		if ($debug);

	return ($ok, $value);
	};

#
#------------------------------------------------------------------------
# Read input configuration file (if no input, just use defaults)
#------------------------------------------------------------------------
sub read_config {
	my ($input_file) = @_;
	@ARGV = split(' ', $input_file);
	return if (! -r $input_file);

	my $savename = '';
	my $parmname = '';
	my $parmval  = '';
	my $parmref  = '';
	my $defname  = '';
	my $defval	 = '';
	my $tmpval	 = '';

	print STDOUT "Reading configuration from ", join(',',@ARGV), ".\n";

	line: while (<ARGV>) {
		next line if /^$/;	# skip empty lines
		chomp;				# drop tailing \n
		if (s/\\$//) {
			$_ .= <>;
			redo unless eof();
			};

		# check commented lines for default parameter values
		# a bit of a kluge, but it works out nicely
		if (/^#\s*([\w_]+)="([^"]*)"/) {
			$defname = get_name($1, 1);
			$defval  = $2;
			print STDERR "Default: $defname => $defval.\n"
				if ($debug);
			next line;
			};
		# Skip any comments
		next line if /^#/;	# skip comments

		# Process assignment statements
		if (/^\s*([\w_]+)="([^"]*)"/) {
			$savename = $1;
			$parmname = get_name($savename, '');
			$parmval  = $2;
			print STDERR "Value  : $savename => $parmval.\n"
				if ($debug);

			# Do we know about this parameter?
			# NOTE: keep, even if we don't know about it to prevent
			# problems with up/down grades (not loose anything)
			if ( ! exists($parm_def{$parmname}) and
				 ! exists($parm_hidden{$parmname}) ) {
				print STDERR "$parmname is a user defined parameter.\n"
					if ($debug);
				};

			# Note if value is default, if so, we'll change it to
			# the current default - maybe counterintuitive, oh well
			# it does help with migration
			if ($parmname eq $defname and $parmval eq $defval) {
				print STDERR "$parmname is the default value: $defval.\n"
					if ($debug);
				$parmval = $parm_def{$parmname};
				};

			# Finally, assign value
			if (exists $parm_kw{$savename} or 
				exists $parm_bool{$savename}) {
				$parmval = ucfirst($parmval);
				};
			   
			if ($savename eq $parmname) {
				$parameter{$parmname} = $parmval;
				}
			else {
				$parameter{$savename} = $parmval;
				};
			};
		};
	};

#
#------------------------------------------------------------------------
# Validate current configuration
#------------------------------------------------------------------------
sub validate_config {

	my $valid = 1;

	print STDOUT "Validating configuration.\n";

	# Really, we only care about the some of the variables - those
	# that have defaults... the rest, well, so what !
	foreach my $val (sort keys %parm_def) {
		my ($ok, $value) = &get_value($val, 1);
		if (! $ok) { $valid = 0; };
		};

	if (! $valid ) {
		print STDERR "\nOne or more errors were encountered!\n\n";
		};

	return ($valid);
	};

#
#------------------------------------------------------------------------
# Write updated configuration file
#------------------------------------------------------------------------
sub write_config {
	my ($database_file) = @_;
	my $ofh = new FileHandle;

	# Make sure things are kosher
	my $result = &validate_config;
	if (! $result) {
		die "Terminating due to configuration error.";
		};

	$database_file = $database_file || $Parse_conf::Conffile;
	my $caller = "$main::program_name" if ($main::program_name);
	$caller .= " $main::program_version" if ($main::program_version);
	$caller .= " $main::program_date" if ($main::program_date);

	print STDOUT "Writing configuration to $database_file.\n";
	$database_file = '&STDOUT' if ($database_file eq '-');
	unless ( open($ofh, ">$database_file") ) {
		warn("Could not open $database_file($!), using STDOUT\n");
		open($ofh, ">&STDOUT");
		};
	$database_file = '-' if ($database_file eq '&STDOUT');

#	print $ofh <<"EOT";
####################################################################
##### This file is automagically generated -- edit at your own risk
#####
##### file: ${database_file}
##### generated via: (${interp_pgm} ${interp_vrm})
#####		${caller}
#####		${Parse_conf::program_name} ${Parse_conf::program_version} ${Parse_conf::program_date}
##### by: ${user}\@${hostname}
##### on: ${current_time}
##### in: ${directory}
##### input files:
#EOT
#	foreach my $file ( split(' ', $input_file) ) {
#		print $ofh <<"EOT";
#####	${file}
#EOT
#		};
#	print $ofh <<"EOT";
#####
####################################################################
	print $ofh <<"EOT";
#------------------------------------------------------------------------------
#
# $database_file
#
# Copyright (c) 2001-2010 Richard Nelson.  All Rights Reserved.
# Version:	  ${main::program_version}
# Time-stamp: <${main::program_date}>
#
# Parameter file for sendmail (sourced by /usr/share/sendmail/sendmail)
# Make all changes herein, instead of altering /etc/init.d/sendmail.
#
# After making changes here, you'll need to run /usr/sbin/sendmailconfig
# or ${main::program_name} to have the changes take effect -
# If you change DAEMON_MODE, QUEUE_MODE, or QUEUE_INTERVAL, you'll also
# need to run /etc/init.d/sendmail restart.
#
# Changes made herein will be kept across upgrades - except for comments!
# Some comment lines have special significance ...
#
# **** **** **** **** DO NOT EDIT THE COMMENTS **** **** **** ****
#
# Supported parameters (and defaults) are listed herein.
#
# Notes:
#	* This setup allows sendmail to run in several modes:
#	  - listener and queue runner..DAEMON_MODE="daemon".QUEUE_MODE="daemon"
#	  - listener only..............DAEMON_MODE="daemon".QUEUE_MODE="none"
#	  - queue runner only..........DAEMON_MODE="none"...QUEUE_MODE="daemon"
#	  - *NOTHING* ?!?..............DAEMON_MODE="none"...QUEUE_MODE="none"
#
#	* You can also run the listener from inetd:
#	  - listener and queue runner..DAEMON_MODE="inetd"..QUEUE_MODE="daemon"
#	  - listener only..............DAEMON_MODE="inetd"..QUEUE_MODE="none"
#
#	* You can also run the queue runner from cron:
#	  - listener and queue runner..DAEMON_MODE="....."..QUEUE_MODE="cron"
#	  - queue runner only..........DAEMON_MODE="none"...QUEUE_MODE="cron"
#
#	* _PARMS entries herein are shown in precedence order, any later _PARMS
#	  field will, if applicable, override any previous _PARMS fields.
#
#	* Values *MUST* be surrounded with double quotes ("), single quotes
#	  will *NOT* work !
#
#------------------------------------------------------------------------------
#				SMTP Listener Configuration
#
# DAEMON_NETMODE="$parm_def{'DAEMON_NETMODE'}";  Keyword  SMTP network mode
#	static:  Do not monitor any network interfaces for changes
#	dynamic: Monitor one or more interfaces for changes
#
DAEMON_NETMODE="$parameter{'DAEMON_NETMODE'}";
#
# DAEMON_NETIF="$parm_def{'DAEMON_NETIF'}";  string SMTP interface(s)
#	This parameter defines the network interface(s) that the daemon
#	will monitor for status changes (via ppp, dhcp, ifup/down hooks).
#
# NOTES:
#	1) Only list more than one interfaces if they only used for fallback,
#	   otherwise the daemon will wind up ping-ponging between interfaces.
#	2) Do not use 'lo' unless your daemon only listens on the localhost.
#
DAEMON_NETIF="$parameter{'DAEMON_NETIF'}";
#
# DAEMON_MODE="$parm_def{'DAEMON_MODE'}";  Keyword	SMTP listener
#	daemon:  Run as standalone daemon
#	inetd:	 Run from inet supervisor (forks for each mail)
#	none:	 No listener (ie, nullclient/smarthost)
#
# NOTE: If you choose "none", mail will build up in the MSP queues
#       and you will not receive any mail from external sites.
#
DAEMON_MODE="$parameter{'DAEMON_MODE'}";
#
# DAEMON_PARMS="$parm_def{'DAEMON_PARMS'}";  String  Listener parms
#	Any parameters here will be ignored when run from cron.
#	Note that {QUEUE,MISC,CRON}_PARMS, if applicable, will override
#	anything declared herein.
#
DAEMON_PARMS="$parameter{'DAEMON_PARMS'}";
#
# DAEMON_HOSTSTATS="$parm_def{'DAEMON_HOSTSTATS'}";  Boolean	Listener stats
#	This parameter determines whether or not host stats are collected
#	and available for the \`hoststat\` command to display.	There will
#	be a (minor) performance hit, as files will be created/updated for each
#	sendmail delivery attempt.	The files are fixed in size, and small,
#	but there can be many of them.
#
DAEMON_HOSTSTATS="$parameter{'DAEMON_HOSTSTATS'}";
#
# DAEMON_MAILSTATS="$parm_def{'DAEMON_MAILSTATS'}";  Boolean	Listener stats
#	This parameter determines whether or not mailer stats are collected
#	and available for the \`mailstats\` command to display.  There will
#	be a (minor) performance hit, as this file will be updated for each
#	item coming into, or out of, sendmail.	The file is fixed in size,
#	and small, so there's no need to rotate it.
#
DAEMON_MAILSTATS="$parameter{'DAEMON_MAILSTATS'}";
#
#------------------------------------------------------------------------------
#				SMTP MTA Queue Runner Configuration
#
# QUEUE_MODE="$parm_def{'QUEUE_MODE'}";  Keyword  SMTP queue runner
#	daemon:  Run as standalone daemon
#	cron:	 Run from crontab
#	none:	 No queue runner (ie, nullclient/smarthost)
#
QUEUE_MODE="$parameter{'QUEUE_MODE'}";
#
# QUEUE_INTERVAL="$parm_def{'QUEUE_INTERVAL'}";  Timespec (p?digits+w|d|h|m|s)
#	Interval at which to run the MTA queues.  What interval should you use?
#	The amount of time that is acceptable before retrying delivery on
#	mail that couldn't be delivered in one run, or how long an item can
#	set in the queue before having the first delivery attempt done.
#
# NOTE: To use persistent queue-runners use this form:  p120m
#
# NOTE: If you leave this field blank, You get *NO* queue runners !!!
#
QUEUE_INTERVAL="$parameter{'QUEUE_INTERVAL'}";
#
# QUEUE_PARMS="$parm_def{'QUEUE_PARMS'}";  String  queue parameters
#	Any parameters here are also used when run from cron.
#	Note that MISC_PARMS and CRON_PARMS, if applicable, will override
#	anything declared herein.
#
QUEUE_PARMS="$parameter{'QUEUE_PARMS'}";
#
#------------------------------------------------------------------------------
#				SMTP - MSP Queue Runner Configuration
#
# MSP_MODE="$parm_def{'MSP_MODE'}";  Keyword  MSP queue runner mode
#	daemon:  Run as standalone daemon
#	cron:	 Run from crontab
#	none:	 No queue runner (ie, nullclient/smarthost)
#
# NOTE:  If QUEUE_MODE="cron" & MSP_MODE="none", the MSP queue will
#		 be run as part of the MTA queue running process.
#
MSP_MODE="$parameter{'MSP_MODE'}";
#
# MSP_INTERVAL="$parm_def{'MSP_INTERVAL'}";  Timespec (digits+w|d|h|m|s)
#	Interval at which to run the MSP queues.  What interval should you use?
#	The amount of time that is acceptable before retrying delivery on
#	mail that couldn't be accepted by the MTA, and was therefore left
#	in the message submission queue.  The MTA shouldn't be down that often
#	so this can be larger than QUEUE_INTERVAL.
#
# NOTE: If you leave this field blank, The MSP queue will *NOT* be run !!!
#
MSP_INTERVAL="$parameter{'MSP_INTERVAL'}";
#
# MSP_PARMS="$parm_def{'MSP_PARMS'}";  String  queue parameters
#	Any parameters here are also used when run from cron.
#	Note that MISC_PARMS and CRON_PARMS, if applicable, will override
#	anything declared herein.
#
MSP_PARMS="$parameter{'MSP_PARMS'}";
#
# MSP_MAILSTATS="$parm_def{'MSP_MAILSTATS'}";  Boolean	Listener stats
#	This parameter determines whether or not mailer stats are collected
#	and available for the \`mailstats\` command to display.  There will
#	be a (minor) performance hit, as this file will be updated for each
#	item coming into, or out of, sendmail.	The file is fixed in size,
#	and small, so there's no need to rotate it.
#
MSP_MAILSTATS="$parameter{'MSP_MAILSTATS'}";
#
#------------------------------------------------------------------------------
#				Miscellaneous Confguration
#
# MISC_PARMS="$parm_def{'MISC_PARMS'}";  String  miscellaneous parameters
#	Miscellaneous parameters - applied to any sendmail invocation.
#	Any parameters here are also used when run from cron.
#	Applied after {DAEMON,QUEUE}_PARMS, and can therefore override them
#	if need be (in which case why did use them?)
#	Note that CRON_PARMS, if applicable, will override anything
#	declared herein.
#
#	Here is where'd you setup and debugging or special parms that you
#	want shared betwixt the possibly separate listener/queue-runner
#	processes.
#
MISC_PARMS="$parameter{'MISC_PARMS'}";
#
#------------------------------------------------------------------------------
#				Cron Job Configuration
#
# CRON_MAILTO="$parm_def{'CRON_MAILTO'}";  String  cronjob output
#	Recipient of *rare* cronjob output.  Some cronjobs will be running
#	under user `mail`, so any problems encountered would probably be missed
#	so define a user who actually (hopefully) checks email now and again.
#
CRON_MAILTO="$parameter{'CRON_MAILTO'}";
#
# CRON_PARMS="$parm_def{'CRON_PARMS'}";  String  cron specific parmeters
#	Cron parameters - applied *only* when sendmail queue running is done
#	via a cronjob. Applied after QUEUE_PARMS and MISC_PARMS, and can
#	therefore override them if need be.
#
CRON_PARMS="$parameter{'CRON_PARMS'}";
#
#------------------------------------------------------------------------------
#				Other stuff
# LOG_CMDS="$parm_def{'LOG_CMDS'}"; Binary	command logging flag
#	Will cause syslog entries for many of the sendmail related commands
#	like runq, mailq, etc - you'll also see cron jobs (if enabled).
#
LOG_CMDS="$parameter{'LOG_CMDS'}";
#
# HANDS_OFF="$parm_def{'HANDS_OFF'}"; Binary  Do *NOT* touch the configuration
#	Set this *ONLY* if you are going to be fully responsible for the entire
#	setup of sendmail - the directories, permissions, databases, etc.  With
#	this variable set to "Yes", nothing will be done for you during updates.
#
#	In other words, "The blood be upon your hands" if you set this...
#	My ability to help with problems will be greatly reduced !
#
#	"Well, a pet peeve of mine is people who directly edit the
#	.cf file instead of using the m4 configuration files.
#	Don't do it! [laughs] I treat the .cf file as a binary
#	file - you should too."
#		--  Eric Allman 1999/10/18
#		http://www.dotcomeon.com/allman_sendmail_qa.html
#
HANDS_OFF="$parameter{'HANDS_OFF'}";
#	
#------------------------------------------------------------------------------
#				Queue Aging Configuration
#
#	Why would you want to age your queues?	On every queue-run interval,
#	sendmail will try *every* file in the queue...	If a site is down
#	for a while, considerable time can be wasted each interval in retrying
#	it.  The scheme supported allows aging by time, and can move the older
#	files to another (less frequently run queue), thereby reducing overal
#	system impact - and providing better mail throughput.
#
#	Note that this support is completely separate from QUEUE_MODE=cron,
#	you can age queues even if you're running QUEUE_MODE=daemon.
#
#	There are four parts to the queue aging support, and these parts
#	may be repeated, to operate on multiple queues.
#
#	1. Interval at which to age the queues (in minutes).
#	   What interval should you use?  Roughly twice the normal queue
#	   interval, so that messages are tried twice in each successively
#	   slower queue.
#
#	   NOTE: some values just wont work, due to crontab pecularities
#	   a value of 90 minutes will actually be run at every x:30 !
#	   Please check /etc/cron.d/sendmail to make sure it is doing what
#	   you thought it should !
#
#	2. Criteria (optional and defaults to interval).  This is the
#	   specification of which files to move.  It defaults moving
#	   files whose age in the queues exceeds the interval.
#	   This field, if specified can be very complex - supporting
#	   aging by just about anything! see qtool(8) for details.
#
#	3. To queue.  This is the queue to which files will be moved.
#	   It may be fully qualified, or relative to /var/spool/mqueue.
#
#	4. From queue.	This is the queue from which files will be moved.
#	   It may be fully qualified, or relative to /var/spool/mqueue.
#
#	Samples:
#	AGE_DATA="[['25m', '', 'hourly', 'main']]";
#		Every 25 minutes, move any file older than 25 minutes from
#		/var/spool/mqueue/main to /var/spool/mqueue/hourly
#
#	AGE_DATA="[['25m',	'', 'hourly', 'main'],\\
#		['120m', '', 'daily',  'hourly']]";
#		Same as the above, but also move files from the hourly queue
#		to the daily queue after 120 minutes in the hourly queue.
#
#	AGE_DATA="[['25m',\\
#		'-e \\'\$msg{message}[0] == /Deferred: 452 4.2.2 Over quota/\\'',\\
#		'overquota', 'main']]";
#		Every 25 minutes, move all files deferred because of quota
#		violations from /var/spool/mqueue/main to
#		/var/spool/mqueue/overquota where they can be processed on
#		a different interval, or by some other means.
#
#	If the above samples suggest Perl arrays, well, they are...
#
# AGE_DATA="$parm_def{'AGE_DATA'}";  Perl array  Queue aging data
#
EOT
	my ($ok, $var) = &get_value('AGE_DATA');
	my $tmpval = eval $var;
	if ($@) {
		warn $@;
		}
	else {
		$var = $tmpval;
		};
	if (not defined $var) {
		print $ofh 'AGE_DATA="";',"\n";
		}
	elsif (not ref $var) {
		print $ofh 'AGE_DATA="',$var,'";',"\n";
		}
	elsif (@{$var} == 0) {
		print $ofh 'AGE_DATA="";',"\n";
		}
	else {
		print $ofh 'AGE_DATA="[\\',"\n";
		foreach my $entry (@{$var}) {
			foreach my $ndx ($[ .. $#{$entry}) {
				@{$entry}[$ndx] =~ s/'/\\'/g;
				};
			print $ofh "['",join("', '",@{$entry}),"'],\\\n";
			};
		print $ofh ']";',"\n";
		};
	print $ofh <<"EOT";
#
#------------------------------------------------------------------------------
#				Dependant variables (set according to other variables)
#
EOT
	foreach my $key (sort keys %parm_dependant) {
		my ($ok, $value);
		# Don't evaluate value, just stuff it...
		next if ( ! $parameter{$key} );
		($ok, $value) = (1, $parameter{$key});
		print $ofh "$key=",'"',$value,'";',"\n";
		};
	print $ofh <<"EOT";
#
#------------------------------------------------------------------------------
#				Hidden variables (the blood be upon your hands)
#
EOT
	foreach my $key (sort keys %parm_hidden) {
		my ($ok, $value);
		# Don't evaluate value, just stuff it...
		next if ( ! $parameter{$key} );
		($ok, $value) = (1, $parameter{$key});
		print $ofh "$key=",'"',$value,'";',"\n";
		};
	print $ofh <<"EOT";
#
#------------------------------------------------------------------------------
#				Deprecated variables (kept for reference)
#
EOT
	foreach my $key (sort keys %parm_deprecated) {
		my ($ok, $value);
		# Don't evaluate value, just stuff it...
		if ( $parm_deprecated{$key} ) {
			($ok, $value) = (1, join('','${', $parm_deprecated{$key}, '}'));
			}
		elsif ( $parameter{$key} ) {
			($ok, $value) = (1, $parameter{$key});
			};
		print $ofh "$key=",'"',$value,'";',"\n";
		};
	print $ofh <<"EOT";
#
#------------------------------------------------------------------------------
#				Unknown variables (kept for reference)
#
EOT
	foreach my $key (sort keys %parameter) {
		if (! exists($parm_def{$key}) and
			! exists($parm_deprecated{$key})) {
			# Don't evaluate value, just stuff it...
			my ($ok, $value) = (1, $parameter{$key});
			print $ofh "$key=",'"',$value,'";',"\n";
			};
		};
	print $ofh <<"EOT";
#------------------------------------------------------------------------------
#

EOT

	close($ofh);
	if ( $database_file eq $Parse_conf::Conffile ) {
		chown '0', '0', "$database_file";
		chmod 0644, "$database_file";
		};
	};

__END__
