binutils - en to unknown language translation catalogue (39 entries)

en: 
        Address            Length
target: 
        Address Length

en: 
        Address    Length
target: 
        Address Length

en:       --plugin NAME      Load the specified plugin
target:       --plugin NAME      Load the specified plug-in

en:    --add-indirect         Add dll indirects to export file.
target:    --add-indirect         Add DLL indirects to export file.

en:    --dllname <name>       Name of input dll to put into output lib.
target:    --dllname <name>       Name of input DLL to put into output lib.

en:    -D --dllname <name>       Name of input dll to put into interface lib.
target:    -D --dllname <name>       Name of input DLL to put into interface lib.

en:    -a --add-indirect         Add dll indirects to export file.
target:    -a --add-indirect         Add DLL indirects to export file.

en:   --plugin <name>              Load the specified plugin
target:   --plugin <name>              Load the specified plug-in

en:   --plugin <p> - load the specified plugin
target:   --plugin <p> - load the specified plug-in

en:   -I --input-target <bfdname>      Assume input file is in format <bfdname>
      -O --output-target <bfdname>     Create an output file in format <bfdname>
      -B --binary-architecture <arch>  Set output arch, when input is arch-less
      -F --target <bfdname>            Set both input and output format to <bfdname>
         --debugging                   Convert debugging information, if possible
      -p --preserve-dates              Copy modified/access timestamps to the output
      -j --only-section <name>         Only copy section <name> into the output
         --add-gnu-debuglink=<file>    Add section .gnu_debuglink linking to <file>
      -R --remove-section <name>       Remove section <name> from the output
      -S --strip-all                   Remove all symbol and relocation information
      -g --strip-debug                 Remove all debugging symbols & sections
         --strip-unneeded              Remove all symbols not needed by relocations
      -N --strip-symbol <name>         Do not copy symbol <name>
         --strip-unneeded-symbol <name>
                                       Do not copy symbol <name> unless needed by
                                         relocations
         --only-keep-debug             Strip everything but the debug information
         --extract-symbol              Remove section contents but keep symbols
      -K --keep-symbol <name>          Do not strip symbol <name>
         --keep-file-symbols           Do not strip file symbol(s)
         --localize-hidden             Turn all ELF hidden symbols into locals
      -L --localize-symbol <name>      Force symbol <name> to be marked as a local
         --globalize-symbol <name>     Force symbol <name> to be marked as a global
      -G --keep-global-symbol <name>   Localize all symbols except <name>
      -W --weaken-symbol <name>        Force symbol <name> to be marked as a weak
         --weaken                      Force all global symbols to be marked as weak
      -w --wildcard                    Permit wildcard in symbol comparison
      -x --discard-all                 Remove all non-global symbols
      -X --discard-locals              Remove any compiler-generated symbols
      -i --interleave [<number>]       Only copy N out of every <number> bytes
         --interleave-width <number>   Set N for --interleave
      -b --byte <num>                  Select byte <num> in every interleaved block
         --gap-fill <val>              Fill gaps between sections with <val>
         --pad-to <addr>               Pad the last section up to address <addr>
         --set-start <addr>            Set the start address to <addr>
        {--change-start|--adjust-start} <incr>
                                       Add <incr> to the start address
        {--change-addresses|--adjust-vma} <incr>
                                       Add <incr> to LMA, VMA and start addresses
        {--change-section-address|--adjust-section-vma} <name>{=|+|-}<val>
                                       Change LMA and VMA of section <name> by <val>
         --change-section-lma <name>{=|+|-}<val>
                                       Change the LMA of section <name> by <val>
         --change-section-vma <name>{=|+|-}<val>
                                       Change the VMA of section <name> by <val>
        {--[no-]change-warnings|--[no-]adjust-warnings}
                                       Warn if a named section does not exist
         --set-section-flags <name>=<flags>
                                       Set section <name>'s properties to <flags>
         --add-section <name>=<file>   Add section <name> found in <file> to output
         --rename-section <old>=<new>[,<flags>] Rename section <old> to <new>
         --long-section-names {enable|disable|keep}
                                       Handle long section names in Coff objects.
         --change-leading-char         Force output format's leading character style
         --remove-leading-char         Remove leading character from global symbols
         --reverse-bytes=<num>         Reverse <num> bytes at a time, in output sections with content
         --redefine-sym <old>=<new>    Redefine symbol name <old> to <new>
         --redefine-syms <file>        --redefine-sym for all symbol pairs 
                                         listed in <file>
         --srec-len <number>           Restrict the length of generated Srecords
         --srec-forceS3                Restrict the type of generated Srecords to S3
         --strip-symbols <file>        -N for all symbols listed in <file>
         --strip-unneeded-symbols <file>
                                       --strip-unneeded-symbol for all symbols listed
                                         in <file>
         --keep-symbols <file>         -K for all symbols listed in <file>
         --localize-symbols <file>     -L for all symbols listed in <file>
         --globalize-symbols <file>    --globalize-symbol for all in <file>
         --keep-global-symbols <file>  -G for all symbols listed in <file>
         --weaken-symbols <file>       -W for all symbols listed in <file>
         --alt-machine-code <index>    Use the target's <index>'th alternative machine
         --writable-text               Mark the output text as writable
         --readonly-text               Make the output text write protected
         --pure                        Mark the output file as demand paged
         --impure                      Mark the output file as impure
         --prefix-symbols <prefix>     Add <prefix> to start of every symbol name
         --prefix-sections <prefix>    Add <prefix> to start of every section name
         --prefix-alloc-sections <prefix>
                                       Add <prefix> to start of every allocatable
                                         section name
         --file-alignment <num>        Set PE file alignment to <num>
         --heap <reserve>[,<commit>]   Set PE reserve/commit heap to <reserve>/
                                       <commit>
         --image-base <address>        Set PE image base to <address>
         --section-alignment <num>     Set PE section alignment to <num>
         --stack <reserve>[,<commit>]  Set PE reserve/commit stack to <reserve>/
                                       <commit>
         --subsystem <name>[:<version>]
                                       Set PE subsystem to <name> [& <version>]
         --compress-debug-sections     Compress DWARF debug sections using zlib
         --decompress-debug-sections   Decompress DWARF debug sections using zlib
      -v --verbose                     List all object files modified
      @<file>                          Read options from <file>
      -V --version                     Display this program's version number
      -h --help                        Display this output
         --info                        List object formats & architectures supported
target:   -I --input-target <bfdname>      Assume input file is in format <bfdname>
      -O --output-target <bfdname>     Create an output file in format <bfdname>
      -B --binary-architecture <arch>  Set output arch, when input is arch-less
      -F --target <bfdname>            Set both input and output format to <bfdname>
         --debugging                   Convert debugging information, if possible
      -p --preserve-dates              Copy modified/access timestamps to the output
      -j --only-section <name>         Only copy section <name> into the output
         --add-gnu-debuglink=<file>    Add section .gnu_debuglink linking to <file>
      -R --remove-section <name>       Remove section <name> from the output
      -S --strip-all                   Remove all symbol and relocation information
      -g --strip-debug                 Remove all debugging symbols & sections
         --strip-unneeded              Remove all symbols not needed by relocations
      -N --strip-symbol <name>         Do not copy symbol <name>
         --strip-unneeded-symbol <name>
                                       Do not copy symbol <name> unless needed by
                                         relocations
         --only-keep-debug             Strip everything but the debug information
         --extract-symbol              Remove section contents but keep symbols
      -K --keep-symbol <name>          Do not strip symbol <name>
         --keep-file-symbols           Do not strip file symbol(s)
         --localize-hidden             Turn all ELF hidden symbols into locals
      -L --localize-symbol <name>      Force symbol <name> to be marked as a local
         --globalize-symbol <name>     Force symbol <name> to be marked as a global
      -G --keep-global-symbol <name>   Localise all symbols except <name>
      -W --weaken-symbol <name>        Force symbol <name> to be marked as a weak
         --weaken                      Force all global symbols to be marked as weak
      -w --wildcard                    Permit wildcard in symbol comparison
      -x --discard-all                 Remove all non-global symbols
      -X --discard-locals              Remove any compiler-generated symbols
      -i --interleave [<number>]       Only copy N out of every <number> bytes
         --interleave-width <number>   Set N for --interleave
      -b --byte <num>                  Select byte <num> in every interleaved block
         --gap-fill <val>              Fill gaps between sections with <val>
         --pad-to <addr>               Pad the last section up to address <addr>
         --set-start <addr>            Set the start address to <addr>
        {--change-start|--adjust-start} <incr>
                                       Add <incr> to the start address
        {--change-addresses|--adjust-vma} <incr>
                                       Add <incr> to LMA, VMA and start addresses
        {--change-section-address|--adjust-section-vma} <name>{=|+|-}<val>
                                       Change LMA and VMA of section <name> by <val>
         --change-section-lma <name>{=|+|-}<val>
                                       Change the LMA of section <name> by <val>
         --change-section-vma <name>{=|+|-}<val>
                                       Change the VMA of section <name> by <val>
        {--[no-]change-warnings|--[no-]adjust-warnings}
                                       Warn if a named section does not exist
         --set-section-flags <name>=<flags>
                                       Set section <name>'s properties to <flags>
         --add-section <name>=<file>   Add section <name> found in <file> to output
         --rename-section <old>=<new>[,<flags>] Rename section <old> to <new>
         --long-section-names {enable|disable|keep}
                                       Handle long section names in Coff objects.
         --change-leading-char         Force output format's leading character style
         --remove-leading-char         Remove leading character from global symbols
         --reverse-bytes=<num>         Reverse <num> bytes at a time, in output sections with content
         --redefine-sym <old>=<new>    Redefine symbol name <old> to <new>
         --redefine-syms <file>        --redefine-sym for all symbol pairs 
                                         listed in <file>
         --srec-len <number>           Restrict the length of generated Srecords
         --srec-forceS3                Restrict the type of generated Srecords to S3
         --strip-symbols <file>        -N for all symbols listed in <file>
         --strip-unneeded-symbols <file>
                                       --strip-unneeded-symbol for all symbols listed
                                         in <file>
         --keep-symbols <file>         -K for all symbols listed in <file>
         --localize-symbols <file>     -L for all symbols listed in <file>
         --globalize-symbols <file>    --globalize-symbol for all in <file>
         --keep-global-symbols <file>  -G for all symbols listed in <file>
         --weaken-symbols <file>       -W for all symbols listed in <file>
         --alt-machine-code <index>    Use the target's <index>'th alternative machine
         --writable-text               Mark the output text as writable
         --readonly-text               Make the output text write protected
         --pure                        Mark the output file as demand paged
         --impure                      Mark the output file as impure
         --prefix-symbols <prefix>     Add <prefix> to start of every symbol name
         --prefix-sections <prefix>    Add <prefix> to start of every section name
         --prefix-alloc-sections <prefix>
                                       Add <prefix> to start of every allocatable
                                         section name
         --file-alignment <num>        Set PE file alignment to <num>
         --heap <reserve>[,<commit>]   Set PE reserve/commit heap to <reserve>/
                                       <commit>
         --image-base <address>        Set PE image base to <address>
         --section-alignment <num>     Set PE section alignment to <num>
         --stack <reserve>[,<commit>]  Set PE reserve/commit stack to <reserve>/
                                       <commit>
         --subsystem <name>[:<version>]
                                       Set PE subsystem to <name> [& <version>]
         --compress-debug-sections     Compress DWARF debug sections using zlib
         --decompress-debug-sections   Decompress DWARF debug sections using zlib
      -v --verbose                     List all object files modified
      @<file>                          Read options from <file>
      -V --version                     Display this program's version number
      -h --help                        Display this output
         --info                        List object formats & architectures supported

en: %s: no recognized debugging information
target: %s: no recognised debugging information

en: %s: warning: shared libraries can not have uninitialized data
target: %s: warning: shared libraries can not have uninitialised data

en: %s:%d: garbage found at end of line
target: %s:%d: rubbish found at end of line

en: Missing Version Needs auxillary information
target: Missing Version Needs auxiliary information

en: Print width has not been initialized (%d)
target: Print width has not been initialised (%d)

en: Unrecognized XCOFF type %d
target: Unrecognised XCOFF type %d

en: Unrecognized debug option '%s'
target: Unrecognised debug option '%s'

en: Unrecognized debug section: %s
target: Unrecognised debug section: %s

en: Unrecognized demangle component %d
target: Unrecognised demangle component %d

en: Unrecognized demangled builtin type
target: Unrecognised demangled builtin type

en: Unrecognized form: %lu
target: Unrecognised form: %lu

en: dialog control
target: dialogue control

en: dialog control data
target: dialogue control data

en: dialog control end
target: dialogue control end

en: dialog font point size
target: dialogue font point size

en: dialog header
target: dialogue header

en: sorry - this program has been built without plugin support
target: sorry - this program has been built without plug-in support

en: unrecognized --endian type `%s'
target: unrecognised --endian type `%s'

en: unrecognized -E option
target: unrecognised -E option

en: unrecognized C++ abbreviation
target: unrecognised C++ abbreviation

en: unrecognized C++ default type
target: unrecognised C++ default type

en: unrecognized C++ misc record
target: unrecognised C++ misc record

en: unrecognized C++ object overhead spec
target: unrecognised C++ object overhead spec

en: unrecognized C++ object spec
target: unrecognised C++ object spec

en: unrecognized C++ reference type
target: unrecognised C++ reference type

en: unrecognized cross reference type
target: unrecognised cross reference type

en: unrecognized section flag `%s'
target: unrecognised section flag `%s'

en: unrecognized: %-7lx
target: unrecognised: %-7lx

en: warning: optionnal header size too large (> %d)
target: warning: optional header size too large (> %d)
