devscripts - en to unknown language translation catalogue (60 entries)

en: Add a trailing comma at the end of the sorted fields. This minimizes future differences in the VCS commits when additional dependencies are appended or removed.
target: Add a trailing comma at the end of the sorted fields. This minimises future differences in the VCS commits when additional dependencies are appended or removed.

en: Adding/removing the B<security> tag will add "team\@security.debian.org" to the Cc list of the control email.
target: Adding/removing the B<security> tag will add "team\@security.debian.org" to the CC list of the control e-mail.

en: An error occurred
target: An error occurred.

en: B<debdiff> was originally written as a shell script by Yann Dirson E<lt>dirson@debian.orgE<gt> and rewritten in Perl with many more features by Julian Gilbey E<lt>jdg@debian.orgE<gt>.  The software may be freely redistributed under the terms and conditions of the GNU General Public License, version 2.
target: B<debdiff> was originally written as a shell script by Yann Dirson E<lt>dirson@debian.orgE<gt> and rewritten in Perl with many more features by Julian Gilbey E<lt>jdg@debian.orgE<gt>.  The software may be freely redistributed under the terms and conditions of the GNU General Public Licence, version 2.

en: B<dscverify> checks that the GPG signatures on the given I<.changes> or I<.dsc> files are good signatures made by keys in the current Debian keyrings, found in the I<debian-keyring> and I<debian-maintainers> packages.  (Additional keyrings can be specified using the B<--keyring> option any number of times.)  It then checks that the other files listed in the I<.changes> or I<.dsc> files have the correct sizes and checksums (MD5 plus SHA1 and SHA256 if the latter are present).  The exit status is 0 if there are no problems and non-zero otherwise.
target: B<dscverify> checks that the GPG signatures on the given I<.changes> or I<.dsc> files are good signatures made by keys in the current Debian keyrings, found in the I<debian-keyring> and I<debian-maintainers> packages.  (Additional keyrings can be specified using the B<--keyring> option any number of times.)  It then checks that the other files listed in the I<.changes> or I<.dsc> files have the correct sizes and checksums (MD5 plus SHA1 and SHA256 if the latter are present).  The exit status is 0 if there are no problems, and non-zero otherwise.

en: B<licensecheck> attempts to determine the license that applies to each file passed to it, by searching the start of the file for text belonging to various licenses.
target: B<licensecheck> attempts to determine the licence that applies to each file passed to it, by searching the start of the file for text belonging to various licences.

en: B<nmudiff> was written and is copyright 2006 by Steinar H. Gunderson and modified by Julian Gilbey E<lt>jdg@debian.orgE<gt>.  The software may be freely redistributed under the terms and conditions of the GNU General Public License, version 2.
target: B<nmudiff> was written and is copyright 2006 by Steinar H. Gunderson and modified by Julian Gilbey E<lt>jdg@debian.orgE<gt>.  The software may be freely redistributed under the terms and conditions of the GNU General Public Licence, version 2.

en: B<plotchangelog> is a tool to aid in visualizing a Debian I<changelog>. The changelogs are graphed with B<gnuplot>(1)  , with the X axis of the graph denoting time of release and the Y axis denoting the Debian version number of the package. Each individual release of the package is represented by a point, and the points are color coded to indicate who released that version of the package. The upstream version number of the package can also be labeled on the graph.
target: B<plotchangelog> is a tool to aid in visualising a Debian I<changelog>. The changelogs are graphed with B<gnuplot>(1)  , with the X axis of the graph denoting time of release and the Y axis denoting the Debian version number of the package. Each individual release of the package is represented by a point, and the points are color coded to indicate who released that version of the package. The upstream version number of the package can also be labelled on the graph.

en: B<suspicious-source> is a script that outputs a list of files which are not common source files.  This should be run in the root of a source tree to find files which might not be the "preferred form of modification" that the GPL and other licenses require.
target: B<suspicious-source> is a script that outputs a list of files which are not common source files.  This should be run in the root of a source tree to find files which might not be the "preferred form of modification" that the GPL and other licences require.

en: B<who-permits-upload> was written by Arno Töll <arno@debian.org> and is licensed under the terms of the General Public License (GPL) version 2 or later.
target: B<who-permits-upload> was written by Arno Töll <arno@debian.org> and is licensed under the terms of the General Public Licence (GPL) version 2 or later.

en: Both are released under the GNU General Public License, version 3 or later.
target: Both are released under the GNU General Public Licence, version 3 or later.

en: Both are released under the ISC license.
target: Both are released under the ISC licence.

en: Both are released under the terms of the GNU General Public License, version 3.
target: Both are released under the terms of the GNU General Public Licence, version 3.

en: CUSTOMIZATION
target: CUSTOMISATION

en: Copyright 2001 Bill Allombert E<lt>ballombe@debian.orgE<gt>.  Modifications copyright 2002,2003 Julian Gilbey E<lt>jdg@debian.orgE<gt>.  B<dpkg-depcheck> is free software, covered by the GNU General Public License, version 2 or (at your option) any later version, and you are welcome to change it and/or distribute copies of it under certain conditions.  There is absolutely no warranty for B<dpkg-depcheck>.
target: Copyright 2001 Bill Allombert E<lt>ballombe@debian.orgE<gt>.  Modifications copyright 2002,2003 Julian Gilbey E<lt>jdg@debian.orgE<gt>.  B<dpkg-depcheck> is free software, covered by the GNU General Public Licence, version 2 or (at your option) any later version, and you are welcome to change it and/or distribute copies of it under certain conditions.  There is absolutely no warranty for B<dpkg-depcheck>.

en: Discards access to SGML catalogs; some SGML tools read all the registered catalogs at startup.  Files matching the regexp /usr/share/sgml/.*\e.cat are recognised as catalogs.  Enabled by default.
target: Discards access to SGML catalogues; some SGML tools read all the registered catalogues at startup.  Files matching the regexp /usr/share/sgml/.*\e.cat are recognised as catalogues.  Enabled by default.

en: Display an usage summary and exit.
target: Display a usage summary and exit.

en: Do not send emails but print them to standard output.
target: Do not send e-mails but print them to standard output.

en: Don't use B<mutt> for sending of mails.
target: Don't use B<mutt> for sending mail.

en: Edit the generated commit message in your favorite editor before committing it.
target: Edit the generated commit message in your favourite editor before committing it.

en: Fill out the templates for each package and display them all for verification. This is the default behavior.
target: Fill out the templates for each package and display them all for verification. This is the default behaviour.

en: Finalize the changelog for a release.  Update the changelog timestamp. If the distribution is set to B<UNRELEASED>, change it to the distribution from the previous changelog entry (or another distribution as specified by B<--distribution>).  If there are no previous changelog entries and an explicit distribution has not been specified, B<unstable> will be used.
target: Finalise the changelog for a release.  Update the changelog timestamp. If the distribution is set to B<UNRELEASED>, change it to the distribution from the previous changelog entry (or another distribution as specified by B<--distribution>).  If there are no previous changelog entries and an explicit distribution has not been specified, B<unstable> will be used.

en: For example, if you want to tag what's checked into Subversion as version 1.0, you could use a command like this:
target: For example, if you want to tag what is checked into Subversion as version 1.0, you could use a command like this:

en: Generate or update a cache of bug reports for the given email address or package. By default it downloads all bugs belonging to the email address in the B<DEBEMAIL> environment variable (or the B<EMAIL> environment variable if B<DEBEMAIL> is unset). This command may be repeated to cache bugs belonging to several people or packages. If multiple packages or addresses are supplied, bugs belonging to any of the arguments will be cached; those belonging to more than one of the arguments will only be downloaded once. The cached bugs are stored in F<~/.devscripts_cache/bts/>.
target: Generate or update a cache of bug reports for the given e-mail address or package. By default it downloads all bugs belonging to the e-mail address in the B<DEBEMAIL> environment variable (or the B<EMAIL> environment variable if B<DEBEMAIL> is unset). This command may be repeated to cache bugs belonging to several people or packages. If multiple packages or addresses are supplied, bugs belonging to any of the arguments will be cached; those belonging to more than one of the arguments will only be downloaded once. The cached bugs are stored in F<~/.devscripts_cache/bts/>.

en: If the 'B<s>' operation is used, the replacement can contain backreferences to expressions within parenthesis in the matching regexp, like `B<s/-alpha(\ed*)/.a$1/>'. These backreferences must use the `B<$1>' syntax, as the `B<\e1>' syntax is not supported.
target: If the 'B<s>' operation is used, the replacement can contain back-references to expressions within parenthesis in the matching regexp, like `B<s/-alpha(\ed*)/.a$1/>'. These back-references must use the `B<$1>' syntax, as the `B<\e1>' syntax is not supported.

en: If this is set to a positive number then the specified number of lines at the start of each file will be read whilst attempting to determine the license(s) in use.  This is equivalent to the B<--lines> command line option.
target: If this is set to a positive number then the specified number of lines at the start of each file will be read whilst attempting to determine the licence(s) in use.  This is equivalent to the B<--lines> command line option.

en: It is also possible to include a comment in the mail sent to the BTS. If your shell does not strip out the comment in a command like "bts severity 30321 normal #inflated severity", then this program is smart enough to figure out where the comment is, and include it in the email.  Note that most shells do strip out such comments before they get to the program, unless the comment is quoted.  (Something like "bts severity #85942 normal" will not be treated as a comment!)
target: It is also possible to include a comment in the mail sent to the BTS. If your shell does not strip out the comment in a command like "bts severity 30321 normal #inflated severity", then this program is smart enough to figure out where the comment is, and include it in the e-mail.  Note that most shells do strip out such comments before they get to the program, unless the comment is quoted.  (Something like "bts severity #85942 normal" will not be treated as a comment!)

en: It is licensed under the terms of the GPL, either version 2 of the License, or (at your option) any later version.
target: It is licensed under the terms of the GPL, either version 2 of the Licence, or (at your option) any later version.

en: July 3, 2010
target: 3 July 2010

en: LICENSE
target: LICENCE

en: Like B<archpath>, this manual page is released under the GNU General Public License, version 2 or later.
target: Like B<archpath>, this manual page is released under the GNU General Public Licence, version 2 or later.

en: Modify the look-up behavior. This influences the interpretation of the I<query> argument. Supported search types are:
target: Modify the look-up behaviour. This influences the interpretation of the I<query> argument. Supported search types are:

en: Note that one of B<$DEBEMAIL> or B<$EMAIL> must be set in the environment in order to use B<mutt> to send emails.
target: Note that one of B<$DEBEMAIL> or B<$EMAIL> must be set in the environment, in order to use B<mutt> to send e-mails.

en: Note that one of B<$DEBEMAIL> or B<$EMAIL> must be set in the environment in order to use direct SMTP connections to send emails.
target: Note that one of B<$DEBEMAIL> or B<$EMAIL> must be set in the environment, in order to use direct SMTP connections to send e-mails.

en: Note that when sending directly via an SMTP host, specifying addresses in B<--cc-addr> or B<BTS_DEFAULT_CC> that the SMTP host will not relay will cause the SMTP host to reject the entire mail.
target: Note that when sending directly via an SMTP host, specifying addresses in B<--cc-addr> or B<BTS_DEFAULT_CC> that the SMTP host will not relay, will cause the SMTP host to reject the entire mail.

en: On Debian systems, the complete text of the GNU General Public License can be found in I</usr/share/common-licenses/GPL>.
target: On Debian systems, the complete text of the GNU General Public Licence can be found in I</usr/share/common-licenses/GPL>.

en: Once the normalized PATH has been set, prepend I<value> to it.
target: Once the normalised PATH has been set, prepend I<value> to it.

en: Options may be specified after the B<bugs> command in addition to or instead of options at the start of the command line: recognised options at this point are: B<-o>/B<--offline>/B<--online>, B<-m>/B<--mbox>, B<--mailreader> and B<-->[B<no->]B<cache>.  These are described earlier in this manpage.  If either the B<-o> or B<--offline> option is used, or there is already an up-to-date copy in the local cache, the cached version will be used.
target: Options may be specified after the B<bugs> command in addition to, or instead of, options at the start of the command line. Recognised options at this point are: B<-o>/B<--offline>/B<--online>, B<-m>/B<--mbox>, B<--mailreader> and B<-->[B<no->]B<cache>.  These are described earlier in this manpage.  If either the B<-o> or B<--offline> option is used, or there is already an up-to-date copy in the local cache, the cached version will be used.

en: Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 3 or (at your option)  any later version published by the Free Software Foundation.
target: Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public Licence, Version 3 or (at your option)  any later version published by the Free Software Foundation.

en: Rationale: We need to be able to specify multiple browser commands so programs obeying this convention can do the right thing in either X or console environments, trying X first. Specifying multiple commands may also be useful for people who share files like F<.profile> across multiple systems. We need B<%s> because some popular browsers have remote-invocation syntax that requires it. Unless B<%%> reduces to %, it won't be possible to have a literal B<%s> in the string.
target: Rationale: We need to be able to specify multiple browser commands, so programs obeying this convention can do the right thing in either X or console environments, trying X first. Specifying multiple commands may also be useful for people who share files like F<.profile> across multiple systems. We need B<%s> because some popular browsers have remote-invocation syntax that requires it. Unless B<%%> reduces to %, it won't be possible to have a literal B<%s> in the string.

en: Recreate signature, respectively use the existing signature, if the file has been signed already.  If neither option is given and an already signed file is found the user is asked if he or she likes to use the current signature.
target: Recreate signature, respectively use the existing signature, if the file has been signed already.  If neither option is given and an already signed file is found the user is asked if they would like to use the current signature.

en: Same as above, but use a full name instead.
target: Same as above, but use a fullname instead.

en: Specify a pattern against which filenames will be matched in order to decide which files to check the license of.
target: Specify a pattern against which filenames will be matched, in order to decide which files to check the licence of.

en: Specify the number of lines of each file's header which should be parsed for license information. (Default is 60).
target: Specify the number of lines of each file's header which should be parsed for licence information. (Default is 60).

en: Specify whether to output the text being processed from each file before the corresponding license information.
target: Specify whether to output the text being processed from each file before the corresponding licence information.

en: Subscribe the given I<email> address to the specified I<bug> report.  If no email address is specified, the environment variable B<DEBEMAIL> or B<EMAIL> (in that order) is used.  If those are not set, or B<!> is given as email address, your default address will be used.
target: Subscribe the given I<email> address to the specified I<bug> report.  If no e-mail address is specified, the environment variable B<DEBEMAIL> or B<EMAIL> (in that order) is used.  If those are not set, or B<!> is given as e-mail address, your default address will be used.

en: The desired browser can be specified and configured by setting the B<BROWSER> environment variable.  The conventions follow those defined by Eric Raymond at http://www.catb.org/~esr/BROWSER/; we here reproduce the relevant part.
target: The desired browser can be specified and configured by setting the B<BROWSER> environment variable.  The conventions follow those defined by Eric Raymond at http://www.catb.org/~esr/BROWSER/; here, we reproduce the relevant part.

en: This allows you to insert B<gnuplot>(1)  commands into the gnuplot script that is used to generate the graph. The commands are placed after all initialization but before the final B<plot> command. This can be used to override the default look provided by this program in arbitrary ways. You can also use things like "set terminal png color" to change the output file type, which is useful in conjunction with the -s option.
target: This allows you to insert B<gnuplot>(1)  commands into the gnuplot script that is used to generate the graph. The commands are placed after all initialisation but before the final B<plot> command. This can be used to override the default look provided by this program in arbitrary ways. You can also use things like "set terminal png color" to change the output file type, which is useful in conjunction with the -s option.

en: This code is copyright by Adam D. Barratt <I<adam@adam-barratt.org.uk>>, all rights reserved; based on a script of the same name from the KDE SDK, which is copyright by <I<dfaure@kde.org>>.  This program comes with ABSOLUTELY NO WARRANTY.  You are free to redistribute this code under the terms of the GNU General Public License, version 2 or later.
target: This code is copyright by Adam D. Barratt <I<adam@adam-barratt.org.uk>>, all rights reserved; based on a script of the same name from the KDE SDK, which is copyright by <I<dfaure@kde.org>>.  This program comes with ABSOLUTELY NO WARRANTY.  You are free to redistribute this code under the terms of the GNU General Public Licence, version 2 or later.

en: This code is copyright by Joey Hess <joeyh@debian.org>, all rights reserved.  This program comes with ABSOLUTELY NO WARRANTY.  You are free to redistribute this code under the terms of the GNU General Public License, version 2 or later.
target: This code is copyright by Joey Hess <joeyh@debian.org>, all rights reserved.  This program comes with ABSOLUTELY NO WARRANTY.  You are free to redistribute this code under the terms of the GNU General Public Licence, version 2 or later.

en: This code is copyright by Patrick Schoenfeld <schoenfeld@debian.org>, all rights reserved.  This program comes with ABSOLUTELEY NO WARRANTY.  You are free to redistribute this code under the terms of the GNU General Public License, version 2 or later.
target: This code is copyright by Patrick Schoenfeld <schoenfeld@debian.org>, all rights reserved.  This program comes with ABSOLUTELEY NO WARRANTY.  You are free to redistribute this code under the terms of the GNU General Public Licence, version 2 or later.

en: This program comes with ABSOLUTELY NO WARRANTY.  You are free to redistribute this code under the terms of the GNU General Public License, version 2 or later.
target: This program comes with ABSOLUTELY NO WARRANTY.  You are free to redistribute this code under the terms of the GNU General Public Licence, version 2 or later.

en: This program is Copyright (C) 2007 by Sune Vuorela <debian@pusling.com>. It was modified by Adam D. Barratt <adam@adam-barratt.org.uk> for the devscripts package.  This program comes with ABSOLUTELY NO WARRANTY.  You are free to redistribute this code under the terms of the GNU General Public License, version 2 or later.
target: This program is Copyright (C) 2007 by Sune Vuorela <debian@pusling.com>. It was modified by Adam D. Barratt <adam@adam-barratt.org.uk> for the devscripts package.  This program comes with ABSOLUTELY NO WARRANTY.  You are free to redistribute this code under the terms of the GNU General Public Licence, version 2 or later.

en: This program is licensed under the terms of the GPL, either version 2 of the License, or (at your option) any later version.
target: This program is licensed under the terms of the GPL, either version 2 of the Licence, or (at your option) any later version.

en: Unless an explicit version number is provided, the archive name is analyzed for a sequence of digits separated by dots.  If something like that is found, it is taken to be the new upstream version number.  If not, processing is aborted.
target: Unless an explicit version number is provided, the archive name is analysed for a sequence of digits separated by dots.  If something like that is found, it is taken to be the new upstream version number.  If not, processing is aborted.

en: Unless an explicit version number is provided, the patch file name is analyzed for a sequence of digits separated by dots.  If something like that is found, it is taken to be the new upstream version number.  If not, processing is aborted.
target: Unless an explicit version number is provided, the patch file name is analysed for a sequence of digits separated by dots.  If something like that is found, it is taken to be the new upstream version number.  If not, processing is aborted.

en: Unsubscribe the given email address from the specified bug report.  As with subscribe above, if no email address is specified, the environment variables B<DEBEMAIL> or B<EMAIL> (in that order) is used.  If those are not set, or B<!> is given as email address, your default address will be used.
target: Unsubscribe the given email address from the specified bug report.  As with subscribe above, if no email address is specified, one of the environment variables B<DEBEMAIL> or B<EMAIL> (in that order) is used.  If those are not set, or B<!> is given as email address, your default address will be used.

en: Use maintainer details from the I<debian/control> B<Maintainer> field rather than relevant environment variables (B<DEBFULLNAME>, B<DEBEMAIL>, etc.).  This option might be useful to restore details of the main maintainer in the changelog trailer after a bogus edit (e.g. when B<-m> was intended but forgot) or when releasing a package in the name of the main maintainer (e.g. the team).
target: Use maintainer details from the I<debian/control> B<Maintainer> field rather than relevant environment variables (B<DEBFULLNAME>, B<DEBEMAIL>, etc.).  This option might be useful to restore details of the main maintainer in the changelog trailer after a bogus edit (e.g. when B<-m> was intended but forgotten) or when releasing a package in the name of the main maintainer (e.g. the team).

en: When running a B<bts cache> command, should we only mirror the basic bug (B<min>), or should we also mirror the mbox version (B<mbox>), or should we mirror the whole thing, including the mbox and the boring attachments to the BTS bug pages and the acknowledgement emails (B<full>)? Default is B<min>.
target: When running a B<bts cache> command, should we only mirror the basic bug (B<min>), or should we also mirror the mbox version (B<mbox>); or should we mirror the whole thing, including the mbox and the boring attachments to the BTS bug pages and the acknowledgement emails (B<full>)? Default is B<min>.

en: attempt to determine the license of source files
target: attempt to determine the licence of source files
